COMBAT HP is a sanitizing additive specifically designed to enhance the effectiveness of anti-mould and anti-algae wall paints for masonry and exterior coatings. Its special formulation creates a synergy with anti-mildew paints and wall coatings, thus enhancing their performance and ensuring the original appearance of surfaces and coatings over time. The use of COMBAT HP is recommended for unfavourable weather conditions such as particularly humid or rainy places, conspicuous fungal spores, or to thermal insulation coatings, even very-exposed ones.1 litre of additive is sufficient to enhance 25 kg or 15 litres of mildew-resistant paint for outdoor use. Not for use on products that are not protected against mildew and molds.When the work is finished, use water to clean the tools.
To use according to current health and safety regulations, paying particular attention to protecting eyes and skin during application.
To deal with mildew, algae or moss, clean the surfaces with COMBAT 222; for a preserving action, we recommend also treating with COMBAT 333.If the mildew is light, you can pre-treat with COMBAT FIX primer and then paint.For old and crumbling substrates, before painting we recommend applying a coat of FISSATIVO ATOMO.
High performance additive for anti-mold anti-algae exterior coatings and wall paints
Find out how to best use COMBAT HP
Discover the strengths of the product
strengthens and prolongs the effectiveness of mildew- and algae-resistant wall paints over time
protects masonry and exterior coatings also when the climate is particularly humid or rainy, and insulation systems
less maintenance and product consumption, more savings
Discover the product features
Find out how to use the product
Hazard identification
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
H410 Very toxic to aquatic life with long lasting effects.
Contains: 2-methyl-2H-isothiazol-3-one.
Contains: 4,5-dichloro-2-octyl-2H-isothiazol-3-one.
Contains: terbutryn.
Contains: 2-octyl-2H-isothiazol-3-one.
Find out how to best use COMBAT HP
COMBAT HP is a sanitizing additive specifically designed to enhance the effectiveness of anti-mould and anti-algae wall paints for masonry and exterior coatings. Its special formulation creates a synergy with anti-mildew paints and wall coatings, thus enhancing their performance and ensuring the original appearance of surfaces and coatings over time. The use of COMBAT HP is recommended for unfavourable weather conditions such as particularly humid or rainy places, conspicuous fungal spores, or to thermal insulation coatings, even very-exposed ones.1 litre of additive is sufficient to enhance 25 kg or 15 litres of mildew-resistant paint for outdoor use. Not for use on products that are not protected against mildew and molds.When the work is finished, use water to clean the tools.
To use according to current health and safety regulations, paying particular attention to protecting eyes and skin during application.
To deal with mildew, algae or moss, clean the surfaces with COMBAT 222; for a preserving action, we recommend also treating with COMBAT 333.If the mildew is light, you can pre-treat with COMBAT FIX primer and then paint.For old and crumbling substrates, before painting we recommend applying a coat of FISSATIVO ATOMO.
Discover the strengths of the product
strengthens and prolongs the effectiveness of mildew- and algae-resistant wall paints over time
protects masonry and exterior coatings also when the climate is particularly humid or rainy, and insulation systems
less maintenance and product consumption, more savings
Discover the product features
Find out how to use the product
Hazard identification
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
H410 Very toxic to aquatic life with long lasting effects.
Contains: 2-methyl-2H-isothiazol-3-one.
Contains: 4,5-dichloro-2-octyl-2H-isothiazol-3-one.
Contains: terbutryn.
Contains: 2-octyl-2H-isothiazol-3-one.
