Find out how to best use ELASTOMARC FINITURA
The performance of the ELASTOMARC system has been tested in line with the UNI EN 1062-7 standard (Determination of crack bridging properties).
It can be used to treat microshrinkages and cracks caused by vibration of the structure or expansion due to different thermal coefficients of materials. It can also be used on wide cracks including those affecting wall structures, with a maximum breadth of 2000 µm. Operations due to structural failure which cannot be repaired with coating systems because of the cause and nature of the structural failure, are excluded.
The system is made up of ELASTOMARC FONDO (code 4150570) and anti-algae ELASTOMARC FINITURA (417 line).
The crack bridging of the elastomeric system is directly proportional to the thickness realized.
ELASTOMARC FONDO must always be covered with ELASTOMARC FINITURA.
Thanks to its light hardening property, by reacting with UV rays the ELASTOMARC system increases the surface hardness of the film without altering its elasticity, creating low dirt retention.
Discover the strengths of the product
Discover the product features
brush, wool roller, sponge
3,5-4 m²/l smooth surfaces at 2 coats; 2-2,5 m²/l slightly bumpy finishes
diluizione con pennello
ready to use; 10-20% max
diluizione con rullo
ready to use; 10% max
Tinting System Marcromie
Resistente a muffe ed alghe
Resistant to mold and alghae UNI EN 15457:2008 and UNI EN 15458:2008