N° series 390

Elastocem

Elastomeric acrylic anti-mould emulsion paint for concrete

Contact us for information
N° series 390

Elastocem

Elastomeric acrylic anti-mould emulsion paint for concrete

This product is not available online. If you want information about the product or would like to know where you can buy it, click the Contact Us button
Description
Advantages
Features

Find out how to best use ELASTOCEM

ELASTOCEM is a highly washable, anti-algae water-based decorative coating with a flat finish. It can be used to paint exterior cement walls which require an effective anti-carbonation barrier and a high degree of protection against the weather and chemical substances.
The product is CE marked, it respects regulation EN 1504-2 which lays out the performance requirements for products used to repair and protect concrete structures.
ELASTOCEM has been tested in line with EN 1062-7 standard (Determination of crack bridging properties).
The binder is an elastomeric acrylic polymer that gives the product the proper elasticity needed to protect surfaces with hairline cracks or crevices up to 500 μm and to withstand eventual expansion of the substrate.

Discover the strengths of the product

Discover the product features

attrezzi
brush, roller, spray gun and airless

resa
6-7 m²/l per coat

strati
2

diluente
water

diluizione con pennello
ready to use; 15% max

diluizione con rullo
ready to use; 15% max

Marcromie
Tinting System Marcromie

Resistente a muffe ed alghe
Resistant to mold and alghae UNI EN 15457:2008 and UNI EN 15458:2008

Description

Find out how to best use ELASTOCEM

ELASTOCEM is a highly washable, anti-algae water-based decorative coating with a flat finish. It can be used to paint exterior cement walls which require an effective anti-carbonation barrier and a high degree of protection against the weather and chemical substances.
The product is CE marked, it respects regulation EN 1504-2 which lays out the performance requirements for products used to repair and protect concrete structures.
ELASTOCEM has been tested in line with EN 1062-7 standard (Determination of crack bridging properties).
The binder is an elastomeric acrylic polymer that gives the product the proper elasticity needed to protect surfaces with hairline cracks or crevices up to 500 μm and to withstand eventual expansion of the substrate.
Advantages

Discover the strengths of the product

Features

Discover the product features

attrezzi
brush, roller, spray gun and airless

resa
6-7 m²/l per coat

strati
2

diluente
water

diluizione con pennello
ready to use; 15% max

diluizione con rullo
ready to use; 15% max

Marcromie
Tinting System Marcromie

Resistente a muffe ed alghe
Resistant to mold and alghae UNI EN 15457:2008 and UNI EN 15458:2008