Kiron
Mica-finish anticorrosive enamel
Find out how to best use KIRON
KIRON has a passivating effect thanks to the action of anticorrosive pigments which hinder the formation of rust.
Its special formulation means it provides:
- A passivating effect: the anticorrosive pigments in the product perform a passivating action, preventing the formation of rust.
- A barrier effect: the special laminar structure creates parallel layers of extenders inside the film which prevent water from being absorbed and provide outdoor resistance.
- A shield effect: the micaceous iron oxide and aluminium in the product prevent ultraviolet radiation from reaching the layers underneath, delaying the deterioration of the binder.
Owing to its special properties and aesthetic finish, KIRON is suitable as a primer and topcoat for application on exposed ferrous articles even in damp environments and in industrial or marine environmental conditions.
To improve scratch strength it is possible to recoat with DECORFILM OPACO 3740238, UNIMARC FINITURA LEGNO s. 318 or UNIMARC FINITURA CERATA clear 3120300.
Discover the strengths of the product
Discover the product features

attrezzi
brush, roller, spray gun and airless

resa
8-10 m²/l per coat

strati
1-2

diluente
turpentine 5200010 or synthetic thinner 5210011

diluizione con rullo
0-3%

diluizione con pennello
0-3%

diluizione con spruzzo
8% max

Marcromie
Tinting System Marcromie

residuo secco a volume
46±1 %
Find out how to best use KIRON
KIRON has a passivating effect thanks to the action of anticorrosive pigments which hinder the formation of rust.
Its special formulation means it provides:
- A passivating effect: the anticorrosive pigments in the product perform a passivating action, preventing the formation of rust.
- A barrier effect: the special laminar structure creates parallel layers of extenders inside the film which prevent water from being absorbed and provide outdoor resistance.
- A shield effect: the micaceous iron oxide and aluminium in the product prevent ultraviolet radiation from reaching the layers underneath, delaying the deterioration of the binder.
Owing to its special properties and aesthetic finish, KIRON is suitable as a primer and topcoat for application on exposed ferrous articles even in damp environments and in industrial or marine environmental conditions.
To improve scratch strength it is possible to recoat with DECORFILM OPACO 3740238, UNIMARC FINITURA LEGNO s. 318 or UNIMARC FINITURA CERATA clear 3120300.
Discover the strengths of the product
Discover the product features

attrezzi
brush, roller, spray gun and airless

resa
8-10 m²/l per coat

strati
1-2

diluente
turpentine 5200010 or synthetic thinner 5210011

diluizione con rullo
0-3%

diluizione con pennello
0-3%

diluizione con spruzzo
8% max

Marcromie
Tinting System Marcromie

residuo secco a volume
46±1 %